DISC.. VORZA FLUX HP RTR 2.4

With the World Championship-winning HB D8 buggy as its foundation, the Vorza takes the race-winning design of the D8 and mixes it up with HPI FLUX HP tech from the Savage FLUX HP to give you awe-inspiring speed! This is a ready to run (RTR) buggy that you can take to BMX jumps for hair-raising big-air thrills, and then you can take it straight to any buggy track for top-level racing. The Vorza FLUX HP is our FASTEST buggy, able to reach speeds over 60 mph*! Can you imagine an electric buggy going that fast? The FLUX ELH-6S speed controller takes 2 batteries, allowing you to fit in up to 6S of LiPo power for utterly insane top speeds and mind-boggling take-off power!

Top-Level Race Buggy Adjustability

At both ends of the car, the Vorza has everything you'd expect from an all-out competition kit, including HB's Inverse Steering Block Design, thick anodized aluminum steering link, optional hinge pin holes for the rear uprights, adjustable roll centre, thick turnbuckle links, aligned king pin and universal joint pivots, sway bar, steel turnbuckles and HB's own counter-rotating shock mount screws.

Adjustable Battery Box

To securely fit a pair of batteries in the chassis, the Vorza HP FLUX uses a sturdy adjustable battery tray fitted with a pair of secure hook-and-loop straps. The length and width of the battery tray can be adjusted to accomodate a pair of matched battery packs standing on edge, and the twin high-voltage T-Plugs from the speed controller are the perfect high-voltage connector to use for no power loss and a secure fit.

World Championship-Winning HB Big Bore Shocks

Four 16mm HB Big Bore shocks are the perfect fit for the Vorza's capable suspension. Each one features an extra-thick shaft, a threaded body and spring collar for precise ride height adjustment, steel mounting hardware and self-tightening lower mount screws. A complete range of pistons are included to let you fine-tune the damping effect, and o-rings prevent the shock oil from leaking out of the body. Flexible rubber boots keep dust and mud off the shock shafts to keep the o-rings clean and protected.

Rock-Solid Reliable Drivetrain

Continuing the rugged reliability of HB nitro buggies and truggies, the Vorza uses the D8 spiral-cut 'worm gear' diffs to get the power from the driveshafts to the wheels. A spiral cut is more reliable and much stronger than standard straight-cut gears, giving you extra confidence and fewer maintenance headaches. You can adjust the diff action with thicker or thinner oils because all three diffs are sealed against leakage, giving you a fantastic boost of tuning ability!

World Championship Suspension Design

With many parts taken directly from the World Champion HB D8 racing buggy, the Vorza is ready to hit the track any time, any place! Equal-length 16mm HB Big Bore shocks smooth out the ride and provide plenty of adjustment, while the D8's solid suspension arms, knuckles and uprights take the pounding of jumps, dips and landings. Sturdy aluminum suspension mounts securely hold the suspension arms to the chassis with a steel screw and washer.

Proven Chassis Design & Layout

The wide buggy chassis allows all of the components of the Vorza drivetrain and electronics to sit flat on the chassis, giving the buggy a very low center of gravity for fantastic handling through turns and corners. The extra-thick 6061 aluminum chassis features side dirt guards to keep rocks and debris away from the gears and driveshafts, and a front angled section provides extra handling over rough terrain and racing tracks.

• Pre-painted body with awesome speed graphics
• Strong and powerful HPI FLUX Tork 2200 brushless motor
• HPI FLUX ELH-6s speedo with fan and 6S LiPo capability!
• 2.4 GHz radio system for crystal-free, comfortable control
• High torque HPI SF-50 metal gear steering servo
• 7075S aluminum 4mm thick chassis
• Nylon stone and dirt guards keep rocks out of the chassis
• Aluminum heatsink motor mount help the motor stay cool
• Hardened steel spur and pinion gear for extreme durability
• Front, centre and rear fluid-filled differentials
• Spiral-cut bevel gears is the strongest design with best balance of efficiency
• Suspension based on World Champion HB D8 buggy
• Aluminum shock towers with multiple shock positions
• 16mm Big bore oil-filled aluminum threaded shocks for confident control
• Long suspension arms give stability and balance
• Sway bars front and rear give confidence while cornering
• Steel turnbuckle links allow you to custom-tune handling
• Adjustable toe-in for suspension fine-tuning
• Sealed shaft drivetrain is maintenance-free and extra strong
• HB/HPI Proto all-terrain tires work great on any surface
• Fantastic-looking V7 black wheels
• Durable black nylon wing for high downforce

• (2) 3s LiPo batteries 4000 mAh 25c
• Compatible charger
• (4) AA batteries for transmitter

• 1/8th Scale 4WD Electric Buggy with FLUX Brushless System, 2.4GHz Radio System and Painted Body
• manual