DISC.. MAMBA MICRO PRO 1:18TH 12V EXTREME CAR ESC W/ 0808 4100KV MOTO

Mamba Micro Pro, our popular high performance Micro controller, just got a new partner - the amazing new 0808 4 pole brushless sensorless 20mm motor!

Castle invented 1/18th scale brushless, and now we are raising the bar. Speed controls are only as good as their components. Castle uses only the latest and best. These aren’t always the least expensive. We can tell the difference and we are sure you will too.

FETS are the little black things that are the heart and soul of all ESCs. FETS have gotten better, just like memory chips and digital cameras. FET capacities are going up, so should ESC performance. That’s the story behind Mamba Micro Pro. Take full advantage, we won’t blame you.

Why stop there?

When you design and build your own products, you don’t have to settle for tired compromises. We took the better components and made them work together in a better manner to lower resistance – resistance results in heat, heat limits controllers’ power. We’ve designed the circuit boards in a new manner to reduce resistance and we’ve added a new highly efficient heat sink to help the controller keep it’s cool.

OK, so what does this mean to me?
Mamba Micro Pro can handle more power for longer periods. Run larger motors in your cars, run larger cars with the same controller. Run in tall grass with no worries of thermal.

Programming Options

The following Mamba Micro Pro settings can be changed with the transmitter:
Low battery voltage cut-off warning
Brake strength
Lockout reverse mode
Timing adjustment
Motor start power
Punch control
Reverse speed
Motor type
Throttle dead band

The Mamba Micro Pro ESC is Castle Link™ compatible too – drivers can use their Castle Link and a Windows

PC to tune and tweak additional settings, such as:
Torque limit
Forward speed limiting
Reverse speed limiting
Throttle response curve
Brake response curve
Arming time
Saved profile setup files
And set custom values for a majority of available programming options!

Maximum Input voltage: 2-3S LiPo or 4-12 NiMH cells
Resistance: 0.045 ohms
Brake: Proportional
Reversible: Yes, with lockout
Low Voltage Cutoff: Programmable
Mamba Micro Pro ESC size: L: 1.5" (38.1mm)
W: 1.1" (27.9mm)
H: 0.6" (15.2mm)
Mamba Micro Pro ESC weight w/wires: 1 oz (28.4g)
0808 motor size: L: 1.5" (38mm)
Diameter: 0.79" (20mm)
Shaft: 0.08" (2mm)
0808 motor weight: 1.8 oz (50g)
Connectory type: Universal