DES 567 BB MG Digital Servo

Suitable for RC model aircraft and boats. Do not use in carbon wings with RDS. Voltage of potentiometer on the gear must be isulated to carbon parts.


This servo features metal gears, and the potentiometer operating voltage is passed to the servo’s metal output shaft. If an aluminium control surface horn or a non-insulated RDS linkage is used with the servo, and if an electrically conductive contact with the airframe also exists - e.g. in an all-carbon model - the servos will interact with each, as the aforesaid voltage is transmitted between them. You can avoid this problem either by using a plastic control surface horn, or by insulating the servo mount in such a way that no electrical connection exists.

As manufacturer, Graupner/SJ GmbH recommends the exclusive use of accessories which have been tested and approved by Graupner/SJ, as this ensures that they are fit for purpose, work correctly and are safe. If you observe this advice, Graupner/SJ accepts liability to you for the product. Graupner/SJ is not in a position to assess the safety risk of every individual product made by other companies. For this reason we deny all liability If you use non-approved components, or accessories made by other manufacturers.

FEATURES

• Digital servo featuring dynamic torque, excellent Speed, superior response and holding torque
• Programmable Digital Circuit and SMT circuitry
• 1024 high resolution
• Supporting 1-16µ depending on programming
• Supports a wide range of frame rates 20Hz-400Hz
• 10-bit processing circuit