Meer informatie
The Graupner mz-18 remote control with 9 channels is the perfect transmitter for almost all model aircraft. The transmitter is particularly suitable for advanced RC pilots. The proven Graupner 2.4 GHz HoTT technology guarantees interference-free and delay-free transmission, even over long ranges. The Graupner mz-18 has a 3.5 TFT color touch display. Received telemetry data can be read off clearly and programming can be carried out directly on the transmitter. As an additional safety feature, the mz-18 has an intelligent voice output - via loudspeakers or headphones. This provides telemetry data, warnings, alarms and vario signals.
The mz-18 can store up to 30 models internally. If additional models or telemetry data are to be stored, the mz-18 has a micro SD card slot. The memory can therefore be easily expanded.
Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4GHz technology
- 75 jump frequencies for safe transmission
- 9 channels
- 3.5" TFT colour touch display for easy operation
- Intelligent speech output of telemetry data, warnings, alarms and Vario signal via loudspeakers or headphones
- Real-time data transmission with optional sensors (Vario, GPS, fuel, temperature, voltage, current, speed and much more)
- Teacher/student system wireless or wired
- Binding of several receivers possible
- Ball bearing billet units (total 8 units)
- µSD card slot for model memory expansion and telemetry data recording
- 30 model memories
- Model copy function
- Updateable via USB
- Model type: helicopter, flight model (normal or delta), glider model
- Numerous servo settings (travel, limit, reverse, center position)
- DualRate and Expo, separately adjustable for each flight phase
- 6 flight phases
- Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90°
- Pitch curves (7 points) separately adjustable for each flight phase
- Gas curves (7 points) separately adjustable for each flight phase
- Phase trims for pitch and gas
- Swash plate limiter function
- Swash plate mixing function
- 5 Linear mixer
- 3 curve mixer
- Numerous model aircraft types from 1QR to 4-flap surfaces
- Elevator: 1 HR, 2HR, V-tail
- Snaproll function
- Aileron differentiation, separately adjustable for each flight phase
- Butterfly function
NEW:
Security:
- FHSS, frequency hopping over up to 75 channels
- Maximum noise immunity through optimized frequency hopping, wide channel spread and antenna diversification
- Intelligent data transmission with correction function
- Extremely high range
- Range test and warning function
- low-voltage warning
- Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional up to 2.5 V)
- Numerous fail-safe functions
- Keylog function to prevent unintentional menu changes
Precision:
- Shorter response times adjustable (10ms period time)
- No additional delays due to module processors. All hopping management is done directly from the 32-bit main processor.
- Synchronous servo run possible by simultaneous control of the servo outputs in blocks of 4
Pilot feeling:
- Largely instantaneous control reactions through direct processing
- Telemetry evaluation in real time
- Wireless teacher/student function
More characteristics:
- Simple and extremely fast binding
- Free channel assignment (channel mapping), transmitter and receiver mixing functions and all servo settings can be easily programmed
- Binding of any number of receivers for channel expansion (max. 16 channels). The last bound receiver sends the telemetry data.
- Future-proof due to update capability via USB interface
Productgegevens
- Fabrikant : Graupner
Samenstelling van de kit
- Transmitter MZ-18 HoTT
- 2000mAh NiMH transmitter battery
- transmitter charger
- USB cable, USB PC interface adapter, USB adapter cable,
- transmitter belt
- Manual in English version
mz-18 transmitter - HoTT 2.4GHz remote control
299,00 €
Bekeken producten
MCM verbindt zich ertoe
Verwerking binnen 24 werkuren
Uw bestelling binnen de 24u te verzenden (op werkdagen) (en volgens de limiet van de beschikbare voorraad) & en snel geleverd.
MCM Crew
Een team van specialisten helpen u in uw taal (Fr, Nl & En) op het nr. + 32 2 376 24 05 (nr. zonder meerkost) van dinsdag tot donderdag van 12u30 tot 18u00 en vrijdag tot zaterdag van 10u tot 18u30 of per email.
Enkele cijfers
- Een winkel van 400m² gevestigd ten zuiden van Brussel.
- 28 jaar ervaring
- + 110 000 productreferenties.
- + 35 500 producten in voorraad.
- + 240 verdeelde merken.
Voorraadpictogrammen bijschrift
- Op voorraad in onze winkel
- Laatste artikel voorraad in onze winkel
- Op voorraad bij onze leverancier
- Beperkte voorraad bij onze leverancier
- Op bestelling maar beschikbaarheid bij de leverancier niet gekend
- Op bestelling maar niet op voorraad bij onze leverancier
- Nieuwigheid in "voor"bestelling
- Artikel niet meer leverbaar