Volledige grootte weergeven

Elektronica Crawler Combos Elektronica & Motoren

Xerun AXE Plus R3 ESC for Crawler

Hobbywing Xerun AXE Plus R3 brushless ESC for Crawler

Meer details

Fabricant : Hobbywing

Referentie: HW30113201

Voorraad status: Op voorraad bij onze leverancier. Levering binnen 2 dagen, onder voorbehoud.

Verzendkosten vanaf 6.99€
of gratis afhaling in de winkel. .

MCM prijs : 135,99 €

Hoeveelheid: Maximale hoeveelheid bereikt

Houd mij op de hoogte van beschikbaarheid

Meer informatie
Specificaties
Productgegevens

Meer informatie

6S high-power crawler ESC

The ESC supports up to 6S LiPo bttery.
It has a maximum output continuous current of up to 135A.
The AXE R3 can be used on 1/10^th and 1/8^th crawler, also compatible with 1/7^th and 1/6^th crawler.
New compact design.
Compatible with all Axe R2 motors.

Dual external control channels, real-time adjustment of parameters

Connect the white and yellow signal cables to open channels of the receicver to adjust parameters in real time.

FOC drive, linear, with plenty torque, and very quite

The XeRun AXE R3 is equipped with a FOC drive system.
The large torque and excellent linearity when operating at low speed further exceeds ordinary brushless power systems and out performs brushed power systems.
The XeRun AXE R3 is nearly silent, and it’s the perfect choice for crawling vehicles.

Smart torque output, easy to control

The ESC automatically increases the torque output to overcome resistance and accelerate up the hill. Vice versa, the ESC automatically reduces the torque output and stabilizes the vehicle speed when going down the hill. Provides excellent control going Up, or Down hills.

The ESC is powerful, with excellent linear control, which can meet the needs of the vehicle's low-speed climbing while also meeting the needs of violent start-up lifting, straight-line high speed, etc.

Smart fan start and stop function

The fan starts to operate automatically ONLY when the ESC temperature reaches the preset value.
The smart start and stop function of the fan helps to save power, reduce noise, and also ensures that the ESC works in a good temperature range.

High protection level

The AXE R3 brushless system is now IP67 protected.
It has excellent waterproofing and dust-proofing performance to cope with various climatic conditions.

Super Internal BEC
It has a built-in powerful BEC with a maximum output current of 15A.
The voltage is switchable between 6V/7.4V/8.4V and is suitable for various standard/high-voltage servos and peripheral electrical equipment on the market (such as light sets, winches, etc.).

Built-in Bluetooth for Connecting the Mobile APP Directly
The ESC has a built-in Bluetooth module.
Parameter settings, data reading, firmware upgrade and other operations can be achieved by connecting the device to the mobile APP.

Obtain AXE Running Status with Real-time Data Function with ease

Connect the ESC to the HW Link mobile app and turn on the real-time data function.
You are able to view throttle, voltage, current, temperature, speed and other data in real time, and obtain the ESC and motor operating status with ease.

Built-in data logging function,ease of obtaining poweroperating status

The ESC has a built in data rcoerdind module. Store up to 10 minutes of your most recent run. Using the HW Link V2saved to the ESC. saved to the ESC. In addition,the module allows you to view Time Data from the ESC for bench top testing and viewing of the data outputs.
Note: Due to transmission distance of bluetooth, the effective distance is only about 5m!

Compatible with AXE R2 motor
AXE R3 ESC supports both AXE 4274 R3 motor and AXE 550/540L/540 R2 motor.
Note: AXE R2 motor, 2800KV/2100KV/1400KV/2300kv are recommended to use 3-4S.

Supports Flysky i-BUS2 Telemetry
Achieve real-time ESC parameter adjustments using the I-BUS2 Telemetry on the Flysky NB4 controllers.
Additionally, the data return function has been implemented to the Flysky NB4 remote controllers.
You will be able to view data such as; battery voltage, motor speed, operating current, ESC/motor temperature, etc in real time on the remote control.

A vast variety of parameters
The XeRun AXE R3 has a vast variety of parameters for adjustment.
It has a total of 21 adjustable parameters and supports 24-degree adjustable Turbo timing.
The maximum speed can be unleashed with good road conditions.

Specificaties

Type	Echelle	1/10,1/8,1/6
	Brushed/Brushless	Brushless
	Sensored/Sensorless	avec capteur
	Etanche	Oui
Spécifications	Courant continu/en pointe	135A/600A
	Alimentation	2-6S Lipo
	Sortie BEC	Switch Mode 6V/7.4V/8.4V @6A
Fils et connecteurs	Fils d'alimentation	Noir-12AWG-265mm1 Rouge-12AWG-265mm1
	Fils de sortie	Non
	Connecteur d'alimentation	XT60
	Connecteurs de sortie	Non
Ventilateur	Dimensions	252510mm
	Plage de tension	6-8.4V
	Alimenté par	BEC
Programmation du contrôleur via	Bouton SEt sur contrôleur	Non supporté
	LED Program Box	Non supporté
	LCD G2 Program Box	Non supporté
	LCD PRO	Non supporté
	OTA Programmer	Non supporté
	Port de programmation	Bluetooth intégré
Enregistrement de données	Valeurs extrêmes	Supporté
	Données en temps réel	Supporté
	Historique des données (Graph)	Supporté
Firmware	Mise à jour Firmware	Supporté
Dimensions et poids	Diemnsions	49.537.932.8mm(Hauteur avec ventilateur)
Dimensions et poids	Poids	126.5g(Avec les câbles d'alimentation)
Applications	Moteurs	Supporte uniquement les moteurs XERUN AXE R2/R3
	Vehicules	1/10^th,1/8^th,1/6^th Rock Crawler
	KV Rating/T Count	AXE R2 540/540L/550
	KV Rating/T Count	AXE R3 4274

Productgegevens

Fabrikant : Hobbywing

30 Andere producten in dezelfde categorie:

Xerun AXE Plus R3 ESC for Crawler

135,99 €

Bekeken producten

Xerun AXE Plus R3 ESC for Crawler

MCM verbindt zich ertoe

Levering in 24/48u

Uw bestelling binnen de 24u te verzenden (op werkdagen) (en volgens de limiet van de beschikbare voorraad) & en snel geleverd.

MCM Crew

Een team van specialisten helpen u in uw taal (Fr, Nl & En) op het nr. + 32 2 376 24 05 (nr. zonder meerkost) van dinsdag tot donderdag van 12u30 tot 18u00 en vrijdag tot zaterdag van 10u tot 18u30 of per email.