Volledige grootte weergeven

Vliegtuigen Beginners Ready to Fly Materie EPP / EPO schuim Aandrijving Electrisch Kits MPX-E-S-2020-07-1 MPX-E-S-2020-07-1 MPX-E-S-2020-07-1

RTF EasyStar 3 (Mode 2+4)

Moeilijkheidsgraad: Beginner

The EasyStar is for a long time the perfect model to get started as an RC pilot.

Here is the Multiplex EasyStar 3 in the RTF edition (Mode 2+4), coming with installed servos, motor set, receiver, plus Smart SX transmitter, LiPo battery and charger.

Meer details

Fabricant : Multiplex

Referentie: MPX1-01503

Voorraad status: Op voorraad in onze winkel. Verwerking binnen 24/48 werkuren.

Verzendkosten vanaf 6.99€
of gratis afhaling in de winkel. .

MCM prijs : 289,00 €

Hoeveelheid: Maximale hoeveelheid bereikt

Meer informatie
Specificaties
Productgegevens
Samenstelling van de kit
Accessoires

Meer informatie

The EasyStar is the ideal entry-level model - quickly built and easy to control. You can learn to fly wonderfully with this “Star”, which has received multiple awards from the experts. It has excellent gliding properties and stays in the air for a long time. With the recommended 3s 2200mAh ROXXY battery, up to 40 minutes of flight time can be achieved without thermals. Thanks to the rear-facing, protected motor, it also tolerates rough landings. It draws attention with its striking design, and the long success story of the Easystar, with which today's professionals began, speaks for itself.
We have continued to develop and improve it to this day.

We have equipped the current version of the Easystar with robust metal gear servos on all control functions. At the same time, we have already equipped the new Easystar 3 with ailerons that are ready for operation. This means that beginners can learn to control all axes from the start. The advanced pilot will be happy about the agility gained.

Get started with the Easy Star 3.

Complete set "Almost Ready-To-Fly" with Multiplex Smart SX transmitter, Multiplex RX-ID receiver, Tx batteries, LiPo battery and AC charger

EasyStar 3 RTF = EasyStar 3 version RR+ + Multiplex Smart SX Tx (+ batteries) + charger

Specificaties

Wingspan :	1.36m
Length :	97cm
Wing area :	28 dm²
Wing loading :	25 g/dm²
Weight :	680g
Suggested battery :	11.1V (3s) en 2200mAh
Channels :	4/5
Flight Time :	environ 20 mn

Productgegevens

Fabrikant : Multiplex
Moeilijkheidsgraad (1 tot 3) : 1
Materie : EPP / EPO schuim
Kits : Beginners
Type : Ready to Fly
Aandrijving : Electrisch

Samenstelling van de kit

Foam parts fully assembled,
Decor sheet applied,
HR, SR and QR servos assembled
Drive set #1-01657,
Charger L703EQU # 82523,
ROXXY EVO LiPo battery 3/2200 mAh # 316655,
RX-5 M -LINK SMART ID 2 # 55823,
Transmitter SMART SX Mode 1/3,
Set of 1.5 V AA dry cell batteries, pack of 3

Accessoires

ROXXY EVO LiPo 3 - 2200M 20C with BID-Chip

MPX316655

Bestelling niet mogelijk daar beschikbaarheid bij de leverancier niet gekend.

45,40 €

30 Andere producten in dezelfde categorie:

RTF EasyStar 3 (Mode 2+4)

289,00 €

Bekeken producten

RTF EasyStar 3 (Mode 2+4)

MCM verbindt zich ertoe

Verwerking binnen 24 werkuren

Uw bestelling binnen de 24u te verzenden (op werkdagen) (en volgens de limiet van de beschikbare voorraad) & en snel geleverd.

MCM Crew

Een team van specialisten helpen u in uw taal (Fr, Nl & En) op het nr. + 32 2 376 24 05 (nr. zonder meerkost) van dinsdag tot donderdag van 12u30 tot 18u00 en vrijdag tot zaterdag van 10u tot 18u30 of per email.