DISC.. Car Boost 1:10 2wd Buggy: White/Red kit RTR

The Boost™ Buggy brings ECX® to the street and the track. Taking cues from more expensive racing rigs, the Boost brings enough power and performance to roll with the big boys. Featuring a potent Dynamite® 20T motor and nylon composite race-friendly chassis. The included Spektrum™ DX2E 2.4 GHz transmitter and SR201 receiver provide extended range, interference-free operation while waterproof electronics keep the Boost running no matter what Mother Nature throws its way. A Dynamite® 1800mAh Ni-MH battery and 2.0A peak charger are included and come pre-wired with high-current EC3™ connectors.

The Boost buggy is a ready-to-run vehicle with everything included in one box—right down to the AAs. Adjustable slipper clutch and oil-filled shocks make the buggy handle as if it were on rails while its low stance enables impressive movement on the pavement or off-road. Two color scheme options ensure your vehicle stands out in a crowd.

Completely ready-to-run with everything needed in one box
Pre-installed Dynamite® waterproof & LiPo compatible Tazer™ 15T ESC (For use with 2S LiPo batteries only)
Spektrum™ DX2E 2.4 GHz radio system and waterproof SR201 receiver
Preinstalled Dynamite 20T motor
Dynamite 2-amp peak charger included
Dynamite Speedpack™ 1800mAh Ni-MH battery included
Waterproof Dynamite servo
ESC and battery come pre-wired with high-current EC3™ connectors
Upgraded driveshafts provide additional reliability even when pushed to the limits
ROAR and IFMAR legal
Wheels are a stylish dish type with ribbed front tires and square pin rear tires
Super low-slung body
The chassis is a narrow design with rolled edges to reduce drag and hanging up on irregular surfaces
Transmission includes an adjustable slipper clutch
Adjustable oil-filled shocks provide great handling
2WD transmission with gear differential makes it reliable and efficient
Custom battery strap with easy-to-use thumb clips

Speed Control: Dynamite 15T Waterproof LiPo Compatible ESC with forward and reverse (installed)
Ball Bearings: Complete less steering
Batteries: 7.4V 1800mah 6-Cell NiMH
Body: Polycarbonate Silkscreened
Charger: NiMH AC Peak Charger 110V-240V 2.0A
Chassis: Injection Molded Nylon Composite
Completion Level: Ready-To-Run
Drivetrain: 2WD
Gear Pitch: 48P
Ground Clearance: 1.42 in (36mm)
Recommended Environment: Off-Road
Shock Type: Coil-Over, Oil-Filled Shocks
Size/Scale: 1/10
Wheel Type: 2.2 in Satin Black, 12mm Hex

Nothing - Everything is in the box!