DISC.. GU-INS (Inertial Navigation System) with GPS *SEE 924503*

GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X, etcق).

OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.

Onboard USB interface connector for firmware updates.

Interface provided to connect with standard receiver and JR satellite receiver.

Easy to install and setup, no need of software on PC for adjustment.
All functions can be setup & confirmed by LED lights indication.آ 
All in one design (combined inertial measurement unit and main controller) with simple cable wiring.

DimensionsُMain controller: 53.5 x 38.5 x 12mm GPS antenna: 42 x 34 xآ 15mm WeightُMain controller: 27g (w/o cables ), GPS antenna: 23g (with cable)
Frequency: 400Hz output to ESC
Operating temperature: -20~80آC
Operating modes: Rate (manual) mode, Auto balance mode, GPS positioningآ mode.
Rate (manual) mode: Max angular velocity: 300 degree/sec
Auto balance mode: Max tilt angle: 60 degree.
GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
Suitable wind condition: < 10 m/s

GPS positioning mode:
a.Hovering accuracy: Horizontal: آ1m, Vertical: آ0.5m
b.Max yaw angular velocity: 250 degree/sec
c.Max tilt angle: 45 degree.
d.Max horizontal speed: 10 m/sُ36 km/hr
e.Max vertical speed: 8 m/s (horizontal posture)