>Cars>Drive>Electric Brushless >Trophy Truggy Flux
HPI Racing

Trophy Truggy Flux

Advanced Advanced

Get right into plug-and-go truggy action with the RTR Trophy Truggy Flux! This amazing off-road 4WD vehicle will thrill you with its jaw-dropping top speed, racing design and wild stunt action!

More details

HPI Racing

HPI107018

In stock, inmediate shipment Last article in stock at our shop Processing within 24/48 working hours.

 Shippingcosts from 6.99€
or collect for free at the shop. .

493,89 €
*

More info

Always a popular kit in its Nitro version, the Trophy Truggy has seen it all when it comes to burly stunts, and with the awesome power of a purpose-designed brushless system it is able to pull off the same tricks and as the Nitro version - but without the noise and fumes! The Trophy Truggy Flux is completely painted and assembled for you, fitted with a no-crystal HPI 2.4GHz radio system and ready for you to add two 2S LiPo batteries! You'll get to experience 14.4 volts of monster power driving 1965KV of brushless power!

2.4GHz Radio system

Ready-built right out of the box and fitted with an all-new 2.4GHz radio system, the Trophy Truggy Flux is the perfect introduction to serious 1/8th off-road truggies! No need to worry about changing crystals, the radio prevents frequency conflicts automatically. If the car ever loses radio signal, an electronic failsafe will bring it to a safe and controlled stop. You get big-air fun and race-track performance in one easy RTR package!

Flux Brushless System

If you're looking for a powerful, versatile and FAST brushless system, you don't have to look any further than the combination of the HPI Flux Scream motor and Flux Rage speed controller! The Flux Scream motor is the perfect match for the Rage speedo: with 1965KV of power, it was designed from the ground up to be bolted into 1/8th scale off-road vehicles to give you the explosion of power you want from any car or truck! The Flux Rage is a monster of a speedo: able to handle twin 2S batteries for up to 4S (14.8 volt!) power, you will experience mind-bending top speeds and blindingly fast acceleration for huge stunts, massive jumps and burly maneuvers that will make your jaw drop! Also, if you ever want to change your speedo settings, you'll be able to experiment easily with the #101280 2 in 1 Professional Program Card! You can change the amount of braking the speedo uses on the motor, reversing speed, motor timing and even the mode for accelerating smoothly in different traction conditions!

Chassis Layout

Formed from 4mm thick 6061 aluminium, the chassis of the Trophy Truggy Flux features angled sides and a huge vertical rear brace for phenomenal stiffness front-to-rear. The twin batteries fit securely within an adjustable and padded battery box, held in place with two thick hook-and-loop strips so they won't move during jumps or crashes. The layout of the components within the chassis makes it easy to change batteries, and a breeze to do maintenance!

  • 4mm 6061 aluminium chassis has angled sides for extra stiffness
  • Fits two hard-case 2S LiPo batteries with adjustable battery holders and hook & loop straps
  • Tough front and rear bumpers help protect against crash damage
  • Low centre of gravity design for top handling in the turns
  • Adjustable mounts for the wide racing wing

Suspension and steering

The Trophy Truggy Flux uses a racing-derived suspension design that's perfect for racing, stunts, bashing - pretty much anything you want to do! The suspension has loads of features that are standard on all the top racing kits: extra-long suspension arms, aluminium steering knuckles, adjustable wheelbase and 17mm hex hubs. For increased durability when hitting those big air highs and rough-and-tumble landings, the Trophy Truggy Flux uses hinge pin braces, captured rod end joints on the camber links and thick webbing on the plastic parts to resist breakages. Use the steel turnbuckles and variety of shock mount and camber link positions to tune your truck to your driving style, the track and the driving conditions!
 
  • Extra-strong webbed suspension arms are strong yet flexible to give you the best balance of driving feel and durability
  • Cast aluminium steering knuckles for increased strength
  • Extra-long shocks provide all the damping you'll ever need
  • Race-tune the truck with plenty of shock adjustment positions
  • Strong steel turnbuckles with chunky gripping points for easy adjustment of camber and front toe
  • Multiple camber link locations offer several options for adjusting roll centre
  • Front & rear sway bars fitted for superior race handling
  • 17mm hex hubs resist stripping out and are hollow for light weight

Performance straight from the box

HPI makes it as easy as possible to get into RC Off-Road action. The Trophy Truggy Flux is completely pre-built and ready to go right out of the box! Everything is assembled and tuned for you by professionals - diffs, shocks, suspension and more are perfect before you even open the package. And with many top racing features already installed, you don't have to do a thing to get going fast! HPI Ready-To-Run vehicles bring you the same high performance and quality that you'd expect from a high end RC kit but with the added convenience of being factory pre-assembled to the highest standards - giving you a high performance RC truck straight from the box! The bodyshell on the Trophy Truggy Flux features a hot new multi-colour paint scheme designed by Jon Miller from RCS Graphicworx.

Specifications

  • Length: 580mm
  • Width: 405mm
  • Height: 180mm
  • Wheelbase: 365mm
  • Track Width Front/Rear (from centre of tyres): 365mm
  • Drivetrain: Full-Time Shaft 4WD

Data sheet

  • Manufacturer : HPI Racing
  • Level of difficulty (1 to 3) : 2
  • Scale : 1/8
  • Type : Ready to Run Basic
  • Drive : Electric Brushless

What you need to complete

  • 2 x 2S LiPo batteries with Deans Ultra plugs
  • Battery charger

Videos

Spare parts for Trophy Truggy Flux

DISC.. E-10 Axle Conversion Adapter (For HPI E-10)

ATOEDF005

 Atomic RC Last item in stock at our store Last item in stock at our store 8,70 €  

Ball Bearing 12x24x6 mm ZZ

BB026

 Ball Bearing In stock at our store In stock at our store 1,95 €  

Alum Steering Servo Arm 15T Spline: HPI Baja

DYNR0113

 Dynamite Can not be ordered because not in stock at our supplier. Can not be ordered because not in stock at our supplier. 19,99 €  

DISC.. 1/5TH BAJA BLOCK FRONT FOR HPI 5T

FAST0310

 Fastrax Last item in stock at our store Last item in stock at our store 29,99 €  

Front Bumper

HPI101010

 HPI Racing In stock at the supplier In stock at the supplier 6,29 €  

30 other products in the same category:

Trophy Truggy Flux

493,89 €

Viewed products

MCM undertakes

Processing within 24 working hours

To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.

MCM Crew

A team of specialists is at your disposal in your language (Fr, Du & En) at + 32 2 376 24 05 (No. non-premium rate) from tuesday till thursday from 12.30 till 18.00 & friday to saturday from 10.00 till 18.30 or by email.

A few figures
  • A store of 400m² located south of Brussels.
  • 28 years of experience.
  • + 110 000 products ref.
  • + 35 500 products in stock.
  • + 240 distributed brands.

Stock icons caption

Secure payments

Visa MasterCard Carte Bleue Bancontact MisterCash Maestro iDeal Scalapay ING Belfius Sofort Bankwire

All your payments are 100% secured.

Shipping

MCM Pickup GLS DPD Pickup DPD Predict DPD Saturday

Free DPD Pick-Up delivery from 149 eur*

Our stores

  • MCM Racing - MCM Skyshop

     Space:
    Showroom 400M2
     Creation date:
    Since 1996
     Phone:
    +32(0)2 376 2405
     

MCM Group, the R/C specialist since 1996

MCM Racing, MCM Skyshop, MCM Slot, MCM Marine