40-Amp Pro Switch-Mode BEC Brushless ESC (V2)

Maximize

Electronics Brushless Speed controller Electronics & Motors

40-Amp Pro Switch-Mode BEC Brushless ESC (V2)

E-Flite 40-Amp Pro Switch-Mode BEC Brushless ESC (V2)

More details

Manufacturer: E-Flite

Reference: EFLA1040B

Stock status: Limited stock at our supplier. Shipment in 4 to 7 days, without warranty.

Shippingcosts from 6.99€
or collect for free at the shop. .

MCM Price : 99,99 €

Quantity Maximum quantity reached.

Notify me when available

More info
Key features
Specifications
Data sheet

More info

The E-flite® 40-Amp Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Key features

Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
Stronger BEC for support of most 3-axis stabilization systems
Drive up to 7 analog or 6 digital standard-sized servos with the BEC
3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
Finned heat sinks
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 70% of battery starting voltage
Programmable throttle input range
Programmable soft start for helis and airplanes
Auto motor shut down if signal is lost or there is interference
Programmable timing—5 user-selectable ranges to use with a large variety of brushless motors
Utilizes new smaller Mosfet technology to minimize weight
Radio System Power ON /OFF Switch
Prewired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

Specifications

Continuous Maximum Current:	40A (Proper cooling and airflow required)
Input Voltage:	3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
Input Connector Types:	13 AWG with E-flite EC3 Connector
Output Connector Types:	13 AWG with 3.5mm Gold Bullet Connectors
Momentary Peak Current:	55A (15 sec) (Proper cooling and airflow required)
Length:	68.0mm (2.70 in)
Width:	33.0mm (1.30 in)
Height:	13.0mm (0.50 in)
Weight:	62.0 g (2.20 oz)

Data sheet

Manufacturer : E-Flite

30 other products in the same category:

40-Amp Pro Switch-Mode BEC Brushless ESC (V2)

99,99 €

Viewed products

40-Amp Pro Switch-Mode BEC Brushless ESC (V2)

MCM undertakes

Processing within 24 working hours

To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.

MCM Crew

A team of specialists is at your disposal in your language (Fr, Du & En) at + 32 2 376 24 05 (No. non-premium rate) from tuesday till thursday from 12.30 till 18.00 & friday to saturday from 10.00 till 18.30 or by email.