Key features
- Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
- 3.5A* continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axis stabilization systems
- Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
- 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range (1.1 ms-1.9ms or 1.2ms-1.8ms)
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads
- Proper cooling and airflow required
- Continuous Current Max Burst Current
Specifications
- Continuous Current: 30 A
- Max Burst Current : 35 A (15 s)
- Length : 51.0 mm
- Width : 28.0 mm
- Height : 8.7 mm
- Weight : 31 g
- Cells : 3-4S LiPo / 9-12 NiMH or NiCd
- Battery Input Leads : 16 AWG with E-Flite EC3 connectors
- Motor Output Leads : 16 AWG with 3.5 mm Gold Bullet Connectors
Data sheet
- Manufacturer : E-Flite
30A Pro SB Brushless ESC (coated) (V2)
59,99 €
Viewed products
MCM undertakes
Deliver within 24/48h
To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.
MCM Crew
A team of specialists is at your disposal in your language (Fr, Du & En) at + 32 2 376 24 05 (No. non-premium rate) from tuesday till thursday from 12.30 till 18.00 & friday to saturday from 10.00 till 18.30 or by email.
A few figures
- A store of 400m² located south of Brussels.
- 28 years of experience.
- + 110 000 products ref.
- + 35 500 products in stock.
- + 240 distributed brands.