More info
EZRUN Max6 G2
Sensored 8S ESC, Fully upgraded performance
The Max6 G2 features Hobbywings new water proof sensor system, and also supports sensorless operation. Rated at up to 200 amps, the Max6 G2 is ready to take on your high powered 8s builds.
Powerful, smooth, with linear control through the entire RPM range. The ESC is suited for everything from hard starts, high speed runs, and low speed response that is unmatched.
Intelligent freewheeling technology, strong drive, low températures
- Higher Driving Efficiency
- Lower Operating Temperature
- Ultra Dynamic Design
It is approximately 15°C lower in temperature in comparison to the previous generation.
The innovative intelligent freewheeling technology effectively reduces heat generation and enables the ESC to have higher driving efficiency.
At the same time, operating temperature is drastically lowered to improve overall stability and reliability of the ESC.
Remarks: Under heavy load conditions, the temperature of MAX6 G2 is comparable to that of MAX5 generation.
Built-in Bluetooth, connect directly to mobile APP
The ESC has a built-in Bluetooth module. It is able to connect directly to the mobile phone APP without other devices for parameter setting, data reading, firmware upgrade and other operations.
User friendly ESC made simpler and convenient for users.
Remarks: The data includes throttle, voltage, current, temperature, rpm, etc.
Build in Data Recording with Graph
The Max6 G2 has built in data recording and can record up to 10 minutes of Data. Using the HW Link V2 app, you will be able to review the saved data and review the runs complete with data Graph.
Intelligent fan start-stop function
The Max 6 G2 features a smart fan circuit that only runs the fan when needed.
The fan will remain "off" unless the ESC temperature requires air flow.
Fan is off when the temperature of the ESC is low.
When the temperature of the ESC reaches the preset value, the fan automatically turns on.
Applicable to All Weather Conditions
The IP-67 waterproof rating guarantees excellent waterproof and dust-proof protection.
The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.
The overall protection level of the motor reaches IP67.
- Splash-proof
- Water-proof
- Dust-proof
1/6thscale power system - Turbo timing technology
The ESC is able to support up to24degrees ofTurboTiming adjustment.
There is an approximate of 20% increase in performance and is recommended to pair with the new HOBBYWING EzRun 4990/5690 G2 motors to get the best performance.
Note: For non-Hobbywing EZRUN 4990/5690 G2 motors, Turbo timing cannot be turned on.
Powerful BEC
The ESC has a built-in super BEC with a maximum output current of up to 25A.The output voltages are switchable between 6V/7.4V/8.4V.This ensures that the ESC is able to support the demanding high-torque servos in the market.
Built-in anti- spark design
The ESC has a built-in anti-spark circuit to protect the battery plug from damaging upon using a higher voltage battery(6-8S) and avoids any injuries.
Perfect combination with EzRun 4990/5690 G2 motor
Achieve the perfect compatibility using it together with EzRun 4990/5690 G2 motors.
Avoid damaging the motor from overheating with the software protection function.
Note: Non-Hobbywing EZRUN 4990/5690 G2 motors is unable to detect motor overheat protection
Specifications
Product Name | EzRun MAX6 G2 | |
Product Number | 30105100 | |
Type | Scale | 1/6th,1/7th |
Brushed/Brushless | BL | |
Sensored/Sensorless | SD | |
Waterproof | Yes | |
Specifications | Cont./Peak Current | 200A/1200A |
Input Voltage | 3-8S Lipo | |
BEC Output | Switch-mode 6V/7.4V/8.4V @8A | |
Wires & Connectors | Input Wires | Black-10AWG-200MMmm*1 Red-10AWG-200MMmm*1 |
Input Connectors | 6.5mm Connectors (Female) | |
ESC Programing via | SET Button on ESC | Not Supported |
LED Program Box | Not Supported | |
LCD G2 Program Box | Not Supported | |
OTA Programmer | Not Supported | |
Program Port | Built-in Bluetooth | |
Fan | Size | 35x35x10mm |
Output Wires | 5-8.4V | |
Input Connectors | Powered by BEC | |
Data Recording | Extreme value | Supported |
Real-time Data | Supported | |
Historical data (Graph) | Supported | |
Firmware | Firmware Upgrade | Supported |
Size & Weight | Size | 70*56*45.5mm |
Weight | 245g (Included input wires) | |
Applications | Motors | 4990/5690 size motors |
Vehicles | 1/6th&1/7th On-road,Truck,Monster Truck | |
Examples: Losi 1/6 Super Baja Rey/Super Rock Rey,Traxxas XRT/X-MAXX/XO-1 | ||
ARRMA 1/7 Limitless/Fireteam/Felony/Infraction/Mojave,Cen 1/7 Reeper | ||
ARRMA Kraton 8S/Outcast 8S,HPI Baja 5B |
Data sheet
- Manufacturer : Hobbywing
Ezrun MAX6 ESC 200 Amp, 3-8s LiPo, BEC 8A
170,99 €
Viewed products
MCM undertakes
Processing within 24 working hours
To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.
MCM Crew
A team of specialists is at your disposal in your language (Fr, Du & En) at + 32 2 376 24 05 (No. non-premium rate) from tuesday till thursday from 12.30 till 18.00 & friday to saturday from 10.00 till 18.30 or by email.
A few figures
- A store of 400m² located south of Brussels.
- 28 years of experience.
- + 110 000 products ref.
- + 35 500 products in stock.
- + 240 distributed brands.