Hobbywing

Xerun XR8 Pro G3 Brushless ESC 200A, 2-4s LiPo, BEC 6A

Hobbywing Xerun XR8 Pro G3 Brushless ESC 200A, 2-4s LiPo, BEC 6A

More details

Hobbywing

HW30113400

In stock, inmediate shipment Last article in stock at our shop Processing within 24/48 working hours.

 Shippingcosts from 6.99€
or collect for free at the shop. .

152,99 €
*

More info

Xerun XR8 Pro G3


Dual brake mode
The innovative closed-loop torque brake control mode is also known as the disc brake mode. It completely solves the problem of non-linear force caused by the influence of vehicle speed on traditional braking methods.
It enables linear output of braking force accurately, similar to the effect of real car disc brakes.
The disc brake mode supports the adjustment of the curvature of the braking force and force distribution of the front and rear sections of the brakes.
At the same time, the traditional braking mode is retained to take into account the driver's control habits.

Excellent hardware design combined with innovative smart freewheeling technology enables the ESC to have higher drive efficiency and lower operating
temperature. Compared with the XR8 Pro G2, the maximum temperature is reduced by approximately 15°C, and the ESC is stable and reliable.
Remarks:  Under heavy load conditions, the temperature of XR8 Pro G3 is lower than the XR8 Pro G2.

Frameless fan, efficient and durable
The frameless fan blade is designed with the use of specially formulated material to reduce the defective rate of the fan caused by impact from small stones, sand and other foreign objects.

Intelligent fan start/stop, noise reduction and power saving
The fan of the ESC does not work when the temperature is low. The fan will automatically turn on when the temperature rises to the pre-set value. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.

Advanced Boost & Turbo Timing Technology
The XR8 Pro G3 ESC performs the best when it is paired with the recommended HOBBYWING motor.
It inherits the same Turbo Timing technology used on the XR10 Pro series used in 1/10th On-Road and Off-Road competition.This ESC is able to support up to 48 degrees of Boost and Turbo Timing.
There is a 50% increase in performance and is only recommended to pair with the new HOBBYWING 4268/4274 G3 motors.

Built-in reverse polarity protection circuit, reinforced protection
The ESC is reverse polarity protected.
In an event when a user makes a mistake by reversing the polarity, the ESC will not be broken.

Real-time data recording function, easy to obtain power running status
After connecting the OTA module box, turn on real-time data recording function to access the operating status.

Capacitor Thermal Protection
Capacitor thermal protection is designed and implemented into the ESC and will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload.
Note:   If the overheating protection of the ESC is off, and it is used on a flat road vehicle, please add a capacitor pack, otherwise the capacitor may be overheated and damaged!

Superior Dustproof Protection
The ESC is IP5X rated. It has a superior dustproof protection to protect the ESC in all types of environments.
In addition, the ESC is equipped with a small protective cover for better fan protection.

Custom ultra-soft 11AWG silicone wire
The ultra-soft 11AWG silicone wire is specially chosen for this product. The wire is ultra-flexible and low in resistance, making it the perfect combination to for your electronics.

Specifications

Product Name XeRun XR8 PRO G3
Product Number 30113400
Type Scale 1/8th
Brushed/Brushless BL
Sensored/Sensorless SD
Waterproof No
Specifications Cont./Peak Current 200A/1080A
Input Voltage 2-4S Lipo
BEC Output 6V/7.4V Adjustable, Continuous Current: 6A(Switch-mode)
Wires & Connectors Input Wires Black-11AWG-200MM*2
Output Wires Black-11AWG-200MM*3
Input Connectors No
Output Connectors No
ESC Programing via SET Button on ESC Not Supported
LED Program Box Not Supported
LCD G2 Program Box Supported
OTA Programmer Supported
Programming Port Independent programming port
Fan Size 30x30x10mm
Output Wires 5-8.4V
Input Connectors Powered by BEC
Data Recording Extreme value Supported
Real-time Data Supported
Historical data (Graph) Supported
Firmware Firmware Upgrade Supported
Size & Weight Size 54.8X36.8X38.8mm
Weight 102.8g
Applications Motors 4268 3660 size motor
Vehicles 1/8thOff-road,On-road Racing & 1/10th Short course truck,Monster truck

Data sheet

  • Manufacturer : Hobbywing

Xerun XR8 Pro G3 Brushless ESC 200A, 2-4s LiPo, BEC 6A

152,99 €

MCM undertakes

Processing within 24 working hours

To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.

MCM Crew

A team of specialists is at your disposal in your language (Fr, Du & En) at + 32 2 376 24 05 (No. non-premium rate) from tuesday till thursday from 12.30 till 18.00 & friday to saturday from 10.00 till 18.30 or by email.

A few figures
  • A store of 400m² located south of Brussels.
  • 28 years of experience.
  • + 110 000 products ref.
  • + 35 500 products in stock.
  • + 240 distributed brands.

Secure payments

Visa MasterCard Carte Bleue Bancontact MisterCash Maestro iDeal Scalapay ING Belfius Sofort Bankwire

All your payments are 100% secured.

Shipping

MCM Pickup GLS DPD Pickup DPD Predict DPD Saturday

Free DPD Pick-Up delivery from 149 eur*

Our stores

  • MCM Racing - MCM Skyshop

     Space:
    Showroom 400M2
     Creation date:
    Since 1996
     Phone:
    +32(0)2 376 2405
     

MCM Group, the R/C specialist since 1996

MCM Racing, MCM Skyshop, MCM Slot, MCM Marine