Hobbywing Quicrun Fusion SE brushless motor for Rock Crawler 1800kV
Aesthetically Appealinq
The Fusion SE provides an integrated space-saving design for builders. With a 58mm length, the Fusion SE has been shortened slightly to allow it to Pt into more vehicles.
FOC Powered
with proven design heritage
FOC has been a game changer for the crawling segm
ent. The extreme efPciency operates at lower temps and provides extended runtimes. The nearly silent operation provides amazing power and response at all speeds while providing extremely low RPM control. Compared to normal brushless, FOC systems provide a dramatic increase in response and power delivery.
Smart torque output and closed loop control.
Amazing control on climbs and descents.
The smart torque output control feature of the built-in FOC ESC ensures unmatched downhill and uphill driving. The ESC can automatically adjust the motor output to RPM to match the driver inputs.
Intelligent Torque Output is a smart management system that allows the ESC to adjust the motor for inclines or descent under any load to match the throttle.
U- matched hill holding
With 8 levels of drag brake force (Power) and 9 levels of Drag Brake Rate, drivers can fine-tune their vehicle' s hill-holding power and general driving. Overall, drag brakes can be 2 times stronger than normal brushless setups.
Designed for durability
Silicon rubber gaskets, electronic buttons, and quality hardware ensure a long life for the Fusion SE. Made to take the abuse and conditions of daily RC bashers.
Ready for all waether and track conditions
IP-67 waterproof rating ensures the Fusion SE has protection from water, dust, and about anything else that gets thrown at it. Designed to withstand all conditions time and time again.
| Product Name | QuicRun Fusion SE | |
| Product Number | 1800KV-30404317 | |
| Type | Scale | 1/10th |
| Brushed/Brushless | BL | |
| Sensored/Sensorless | SD | |
| Waterproof | Waterproof | |
| Cont./Peak Current | 40A | |
| Specifications | Input Voltage | 2-3S Lipo/6-9 Cell NiMH |
| BEC Output | 6V/7.4V@4A、6A peak | |
| Note: 7.4V voltage can be output only when using 3S Lipo | ||
| Motor KV | 1800KV | |
| Diameter/length of Motor | 36mm / 58.1mm | |
| Shaft diameter / exposed shaft length | 3.175mm / 16.5mm | |
| Motor Poles | 4 | |
| Input Wires | Red-14AWG-200mm*1 / Black-14AWG-200mm*1 | |
| Input Connectors | XT60 | |
| SET Button on ESC | Not Supported | |
| LED Program Box | Supported | |
| LCD Program Box | Not Supported | |
| OTA Programmer | Not Supported | |
| Program Port | Independent programming interface(switch position) | |
| Firmware Upgrade | Not Supported | |
| Firmware | Size | 36X58.1mm |
| Weight | 201g (including wires&connectors) | |
| Applications | Vehicles | 1/10th rock crawler |
Quicrun Fusion SE for Rock Crawler 1800kV
95,99 €
To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.
A team of specialists is at your disposal in your language (Fr, Du & En) at + 32 2 376 24 05 (No. non-premium rate) from tuesday till thursday from 12.30 till 18.00 & friday to saturday from 10.00 till 18.30 or by email.
All your payments are 100% secured.
Free DPD Pick-Up delivery from 149 eur*
In stock at our store
Last item in stock at our store
In stock at our supplier
Limited stock at our supplier
To be ordered but availability unknown from the supplier
To be ordered but not in stock at our supplier
New product in pre-order
The product is sold out
