DISC.. RR Tommy jr.

The Multiplex Tommy Jr. is a sporty biplane, which was modeled after the American home-made aircraft designed by George Meyer. During development, value was placed on realizing an uncomplicated model with fantastic flight characteristics and a high degree of prefabrication.

The Tommy Jr. is the ideal after work and “always there” model. It has absolutely uncritical flight characteristics and that in a very wide speed range. It always remains safe and precise to control. In addition, it is absolutely suitable for aerobatics. It will be a lot of fun for the advanced beginner, the "young gun" or vetrerans.

In most cases, the model fits into the car fully assembled and is therefore always quickly ready for a flight. In the event that the Tommy Jr. need to be disassembled, the landing gear is quickly unclipped. The wing unit, consisting of the upper and lower wing with canopy, can then be removed from the fuselage after loosening only 2 plastic screws.

• Great scale model of the prototypical biplane
• Very neutral, uncritical flight behavior.
• Painted and decorated.
• Easy to transport thanks to detachable landing gear and detachable wing unit
• Convenient battery replacement through the fuselage cover.
• High performance BL motor and controller.
• 4 Hitec HS-65HB servos for elevator, rudder and aileron are already installed.
• Very high degree of prefabrication: Glue the wing unit together and assemble, glue in the tailplane, clip in the landing gear, install the receiver and fly!

• Wingspan : 900 mm
• Length : 930 mm
• Flying weight : 1180 g
• Flight Time : 6 minutes
• Battery : LiPo 3S 2600 mAh
• Motor : Roxxy BL C35-42-930Kv
• ESC : Roxxy BL-Control 755 S-BEC
• Servos : Hitec HS 65HB

• Zacki Elapor Super liquid 10 g
• LiPo 2S 2600 mAh battery (suggested : Roxxy Evo LiPo 3-2600M 40C)
• 4-CH+ receiver
• 4-CH+ transmitter
• Battery charger

RR flight model with drive and servos, almost completely built