GS02 chassis 1:10th scale

• TTR transmission
• Front weight balance
• 4 wheel drive
• CMS System
  Rear cantilever suspension System
• Rear shock relocation
• Rear shock hoop

Special parts :

• GS02 Hardened Unversal shaft
• GA44 Heavy Duty Diff Locker
• GA60 Brass Steering knuckle bushing
• Aluminum 12mm Wheel Hubs (4) 8mm thick
• Aluminum ball set for GS02 chassis (Silver)
• Shock Spring soft green 16.2x36mm (2), 15.2x61mm (4)
• Shock Spring Hard Red 16.2x36mm (2), 15.2x61mm (4)

STEEL LADDER FRAME
GS02 trame is designed to look as a châssis of a real car trame and the material of the trame is made of high strength Steel, C-channel side rail and is with hex wrench bolted with cross members, which make it résistant to twisting or wraping.
Also, Steel parts are black powder coated finish to prevent rust.

C-CHANNEL SIDE RAIL

ADJUSTABLE WHEELBASE
GS02 châssis allows three type of easy adjustment of wheelbase convert kit to use any type of 300,313 and 324mm custom bodies. (optional link kits are sold separately)

FRONT WEIGHT BALANCE
BOM's weight balance designed to be placed on theforward of the car.
This will increase the tire tracktionto the front wheelto provide bettercrawling on a high tilt angle rocks and better driving performance when hill climbing and this will help minimizing thevehicle's rolling over when climbing.

CHASSIS MOUNTED SERVO SYSTEM with Panhard bar
BOM's steering System has a steering servo on the frame just like a 1:1 real car.
It is designed to make it as closed to the zéro bump steer so bump steer movement does not
appear by front wheel suspension movements,
so we ended up with maximizing the steering performance of the vehicle.
In addition, the Panhard-bar is designed to avoid interférence with nearby parts, so thatthe front suspension and shocks can move freely without any loss

BATTERYTRAY
The battery can be easily replaced and can accom-modate up to 7,600mAh 2-cell Lipo batteries or 5,000mAh 3-cell Lipo batteries. (7,600mAh 2-cell LiPo or 5,000mAh 3-cell LiPo)

DUST PROOF ELECTRONICS BOX
It protects electronic equipments such as winch controllers and BEC, which are often used for scale trucks, from foreign substances

SKID PLATE
The skid plate protects the transmission and other critical compo-nents by the fiat surface that allows the BOM to slip and ride on rocks and other obstacles easily.

DRIVELINES
The drive lines of the front and rear axles are arranged in straight-line to reduce the fatigue stress of the universal shaft and reduce the loss of driving power by providing efficient driv-ing lines

TORQUE TWIST REDUCE TRANSMISSION
The TTR transmission is designed to drive in a stable position without pulling the balance of power transmitted to the axle.
The front and rear universal shafts based on the transmitter each rotâtes clockwise and counterclockwise, this compensâtes for the forces acting on the opposite rotational forces due to the action(torque) and reaction(reverse torque) because of that this vehicle can run in a super stable conditions.

DUAL SLIPPER CLUTCH
The slipper pads are designed to hold the spur gears evenly to allow more précisé setting.

ALL METAL INTERNAL GEARS

HARDENED CARBON STEEL UNIVERSAL SHAFT

EASY ADJUST MOTOR MOUNT
You can easily replace and install the motor pinion gear to changing the gear ratio.

GA44 AXLE
GA44 axle is designed with the hardcore rock crawler in mind.
Axles are made of high-strength meterials, and it will look and perform optimum off-road perfermance as real 1:1 vehicle when 4-Link suspensions added.
The GA44 axle housing is a durable one-piece type.
The angle of the differential cover is designed to reduce the risk of damage due to frontal impact and is therefore very suitable for off-road driving.

SD SCALER SHOCK ABSORBER
SD Scaler Shock is a Coil-over styled oil shock absorber optimized for the scale trucks.
The oil filled inside the shock minimizes splash when the vehicle is driven, and provides a high-durability aluminum shock body with 3.5mm heavy duty shock shafts are added, these will help you to drive roughly on rough surfaces.
Beginners also can easily assemble this shock and change setups, and the adjustable nut makes it easy to adjust the ride-hight so you can quickly change your car setup even when driving condition changes.

REAR CANTILEVER SUSPENSION SYSTEM
(SELECT SETUP REAR SUSPENSION)
The GS02 rear cantilever suspension System is designed for efficiently use of custom fiat beds, full drop beds and the interiors.
It also pro vides smooth motion of the shock and big wheel travel.

REAR SHOCK RELOCATION KIT(selectsetup rear suspension)
Extra parts are included in the kit so that you can change the different types of shock mount positions.

• Width : 200 mm
• Wheelbase : 313 mm

• Radio system
• Motor
• Servo
• Battery
• ESC
• Receiver
• Body
• Wheels
• Tires