Servo HSB-9485SH

Ultra Premium brushless servo of the 20 mm class

Strong HSB-9485SH servo has a sensational power-saving technology - up to 90% less energy needs!
Thanks to its special high-performance engines and a newly developed electronic "Power Miser", this brushless servo provides the best values in each case with steel gear.
Compared to all other available on the market brushless servos HITEC brushless servos have the advantage that you have a much lower power requirement with the same performance. This is achieved by the feedback of the energy generated during deceleration of the servo (generator principle) in their drive battery. This advanced technology provides HiTEC exclusively.

Another nice gimmick is the slow start of the neutral position after commissioning.
Rowing and their mechanisms for large models are protected and the model does at rest ready for use, no more twitching on power!

PAD
If you have a battery switch, or BEC voltage use their cruise control, the enclosed in each servo PAD (Power Absorbing Device) can be easily plugged in parallel to the servo. The return flow of current is prevented EFFICIENT ENERGY compounds in non-compatible. Thus, the servos as any other known servo behave.

• Programmable
• Brushless motor
• High positioning speed
• High force
• High holding force
• steel gear
• 2 ball bearings
• 25 splines for Servo Horn

• Width : 20 mm
• height : 37 mm
• length : 40 mm
• Weight : 0.062 Kg
• servo Type: Standard
• Features: Wide Voltage Digital
• Engine type servos: brushless
• Transmission: steel
• operating voltage in V: 4.8 to 8.4 V
• operating time s / 60 ° at 4.8 volts: 0.22
• actuating time s / 60 ° at 6.0 volts: 0:18
• setting time s / 60 ° at 7.4 volts: 0.15
• torque kgcm in at 4.8 volts: 26
• torque at 6.0 kgcm voltage: 26
• torque in kgcm at 7.4 volts: 26
• teeth: 25T
• Bearings: Yes
• Waterproof: No
• Short description Servo: Stromsparer
• flight Yes
• Recommendation Heli: Yes
• Recommended Car: Yes
• Recommended boat: Yes