Here is the G-Made GOM Rock Buggy 1/10 crawler. Assembly kit edition.
This radio controled 1/10 crawler comes with a 2 speed transmission, DIG system, 4 wheel drive, chassis mounted servo, and front weight balance.
FULL TUBE FRAME CHASSIS
The tube chassis is lightweight and extremely rigid.
The three-dimensionally connected frame structure effectively compensates from external impact.
FRONT WEIGHT BALANCE
GOM's weight balance designed to be placed on the forward of the car This will increase the tire tracktion to the front wheel to provide better crawling on a high tilt angle rocks and better driving performance when hill climbing and this will help minimizing the vehicle's rolling over when climbing.
CHASSIS MOUNTED SERVO SYSTEM WITH PANHARD BAR
GOM's steering system has a steering servo on the frame just like a 1:1 real car.
It is designed to make it as closed to the zero bump steer so bump steer movement does not appear by front wheel suspension movements, so we ended up with maximizing the steering performance of the vehicle.
DUSTPROOF RECEIVER BOX
Receiver box helps keep dirt and debris out of the receiver.
FORWARD EASY ACCESS BATTERY DOOR
There is plenty ot space to install various types of batteries and easily remove and install.
SKID PLATE
The skid plate protects the transmission and other critical components by the flat surface that allows the GOM to slip and ride on rocks and other obstacles easily.
DRIVELINES
The transmission and transfer case are designed in the same proportions as the actual four-wheel drive vehicle and enhancing the scale of the vehicle.
By lowering the transfer case and arranging the dnve lines straight with the front and rear axles the fatigue stress of the universal shaft has been reduced, with that efficient driving lines provided to reduce the loss of driving force.
TRANSMISSION & TRANSFER CASE
The transmission is designed to look the same as a real 1:1 vehicle and the car is even more scale look.
To provide the best performance depending on the driving situation the transmission and transfer case can be controlled by three motion with one servo.
2 SPEED TRANSMISSION
The 1st gear is for hardcore rock crawling, and the 2nd gear is tor hill climb or high-speed driving.
ROCK TRANSFER CASE
Includes reduction gear and dig function, transmit the power evenly throght front and rear axle.
•Dig: This aids in extreme climbs, descents and tight technical turns.
DUAL SLIPPER CLUTCH
The slipper pads are designed to hold the spur gears evenly to allow more precise setting.
EASY ADJUST MOTOR MOUNT
You can easily replace and install the motor pinion gear to changing the gear ratio.
GA60AXLE
GA60 axle is designed with the hardcore rock crawler in mind. Axles are made of high-strength meterials. and it will look and perform optimum off-road perfermance as real 1:1 vehicle when 4-Link suspensions added.
GA60 is one piece durable solid axle housing
The axle tube is structurally reinforced with an axle truss, and the angle of the differential cover is designed to reduce the risk of breakage due to frontal impact and improve off-road driving.
HI STEER ZERO ACKERMAN KNUCKLE ARM
Reduces steering link hitting on obstacles and easy to make tight turns.
ADJUSTABLE CASTER
The GA60 front axle can be adjusted to the steering style to have a smooth and short turn angle depending on the driving style or to adjust to improve straight stability by changing the caster angle.
KINGPIN ANGLE
Keeping the scrub radius to a minimum to let your steering servo work at it's full potential and increases the steering efficiency.
PANHARD BAR AXLE MOUNT
The GA60 axle can equipped the Panhard-Bar axle mount to achieve a various type of suspension links.
XD AERATION 103mm SHOCK ABSORBER
This XD aeration shock is a coil over shock which will perfectly feature in off-road driving.
The shock oil inside of the shock body will prevent the popping motions during driving on rough surfaces, and keep the car stable in off-road driving.
CNC machined aluminum shock bodies and 3.5mm heavy duty shock shafts provide high-durability in rough course driving.
Possible to change the car setup easily and quickly when changing driving situations.
Simple to change the rebound without disassembling the shock cap by using the aeration shock cap screw, and it’s also simple to setup the ride height by using adjustable nut for different driving situations.
MT2202 2.2 INCH M/T OFF ROAD TIRE
Tire Height: 143mm (5.6")
Tire Width: 52mm (2.0")
Inner Diameter: 56mm (2.2")
GT02 2.2 INCH BEADLOCK WHEEL
Width: 36mm
Diameter: 55.8mm (2.2 inch)
Offset: 2.5mm negative offset Hex mount: 12mm
INCLUDED BODY IS CLEAR.
INTERIOR COCKPIT
Includes realistic detailing racing bucket seats, handles and gearboxes to add realism to yout cockpit interior.
1/10 GOM ROCK CRAWLER KIT
353,99 €
To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.
A team of specialists is at your disposal in your language (Fr, Du & En) at + 32 2 376 24 05 (No. non-premium rate) from tuesday till thursday from 12.30 till 18.00 & friday to saturday from 10.00 till 18.30 or by email.
All your payments are 100% secured.
Free DPD Pick-Up delivery from 149 eur*
In stock at our store
Last item in stock at our store
In stock at our supplier
Limited stock at our supplier
To be ordered but availability unknown from the supplier
To be ordered but not in stock at our supplier
New product in pre-order
The product is sold out
