More info
4 Channel Intelligent Balance Charger
Dedicated design for FPV.4CH independent output,support 3-4S LiPo Battery
Applicable to the mainstream FPV batteries,4CH independent output which can charge 4 LiPo batteries at the same time. equipped with LED indicator and buttons,Max. 100W/5A charging for each channel.
Dedicated design for FPV racing drone
Suitable for the mainstream FPV batteries.no longer need adapter cable or balance board.plug and play.
More wider range of application
Not only for FPV batteries,but also for the common 3S/4S LiPo batteries which is used for other RC models or drones.
Balance charge 4xLiPo batteries at the same time simultaneously
4 Independent output can charge 4 batteries at the same time Max. 100W/5A charge on each channel
3 Different charging current optional
In order to charge the batteries at safety C rate,E5 provides 3 different charging current for useris setting.user can set the current by the cambered button.
DC Input meets the demand of outdoor use
e5 accepts a power supply of 11 -32V output,and vehicle power or battery pack as well.meets user's demand of outdoor use.never worry about no battery can be used any more when play in the field.
Intelligent chip control maximum safety and high efficiency
Built-in intelligent identity management chip,intelligent detect charging equipment and intensify constant-current technology.raise the efficiency and avoid battery or charger damage
Multiple protection,safer using
e5 conform to national safety standards,built-in intelligent safeguard protection System» Not only protect the charger but also prétend the battery bubbling or expansion during charging.
- Over current protection
- Over voltage protection
- Leakage protection
- Short circuit protection
- Over temperature protection
- Reverse protection
Excellent material anti-flaming and falling-resistant
The Shell madefrom PC anti-flaming material, fireproof and higher température résistant Lighter and stronger, shell never fade, doll polish technology scratch résistant
- Anti flamming
- High temperature resistant
- falling resistant
Built-in strong convection cooling fan
With built-in strong convection cooling fan, internai air duct design,cooling slots on the bottom and sides.make sure the charger always in safe température and low noise
Anti-skid rubber pad.more stable
Installée! antiskid rubber pad on bottom, make sure charger placed stable and not easy to slide.prevent desk or car surface be scratched
Safe technology, use at ease
Strict manufacture and assembling technology, structural design use seamless connection
Small and light,easy to carry
Compact design for outside easy carrying
Specifications
- DC input voltage:11V-32V
- Charge power: 200W
- Charge current: 2.0A/3.0A/5.0A
- Battery type:LiPo
- Battery cell count:3-4S
- Charging mode:Balance
- Balance current: 500mA/cells
- Indication:4xLED
- Dimension:126x126x42mm
- Weight: 400g
Data sheet
- Manufacturer : EV-Peak
Composition Kit
- e5 charger
- DC input cable (XT-60 / XT-30
DISC.. E5 charger 4 output lipo 3-4S max 5,0A 200w
45,00 €
Viewed products
MCM undertakes
Processing within 24 working hours
To send your order within 24h (on working days) (according to the limit of the available stock) & and delivered quickly.
MCM Crew
A team of specialists is at your disposal in your language (Fr, Du & En) at + 32 2 376 24 05 (No. non-premium rate) from tuesday till thursday from 12.30 till 18.00 & friday to saturday from 10.00 till 18.30 or by email.
A few figures
- A store of 400m² located south of Brussels.
- 28 years of experience.
- + 110 000 products ref.
- + 35 500 products in stock.
- + 240 distributed brands.